北京快乐8

JDC500 Concrete Mixer

JDC500 Concrete Mixer

JDC500 concrete mixer is a single-horizontal-shaft forced concrete mixer. This mixer is a unique product of our company and has good mixing quality. Users can choose either wheeled or fixed. The fixed type is better for one ton motorized rollover, and the wheeled conversion site is convenient.

178 3993 6555

product advantages

Changli JDC500 concrete mixer has the following 4 performance advantages

1. More advanced technology

Imported ship paint spraying process and heat treatment process with guaranteed quality;

2. Longer life

Wear-resistant alloy stirring arm, the service life can reach 3-5 times of ordinary stirring arm;

3. Good mixing quality

The special design of the mixing knife angle makes the mixing more even;

4. Guaranteed quality

Changli JDC500 concrete mixer has passed the IOS9001 international quality management system. The factory has passed six process tests to ensure the quality of each product.

Product parameters

Nominal capacity: 500 liters Theoretical productivity: 25-30m³ / h
Rated feed capacity: 800 liters Speed of stirring shaft: 27.6
Large aggregate size (pebble / crushed stone): 60mm Hopper average lifting speed: 19m / min
Stirring time: 30s Water supply method: time relay
Number of working cycles: 70 / h

product details

1. Feeding system

JDC500 concrete mixer loading system is composed of lifting mechanism, loading hopper, loading rack, feeding hopper and other components.

The feeding rack is composed of rails and extended rails, etc. The rail rack is connected to the mixing drum and the rack by bolts. The extended track is bolted to the track frame and can be removed during transportation and storage.

The lifting mechanism is composed of a brake motor, a three-stage reduction box, a drum, and a wire rope.

The brake motor can ensure that the hopper can stop at any position of the loading rack under full load.

JDC500 Concrete Mixer

2. Stirring device

JDC500 concrete mixer mixing device consists of a mixing cylinder, a mixing shaft, a mixing blade and a shaft end seal.

The mixing drum is an integral welding process. There are two kinds of liners in the cylinder, of which 12 are side liners and 77 are arc-shaped liners. It is tightly connected to the cylinder by a countersunk screw. Lining plate is wear-resistant alloy cast iron, with good wear resistance and long service life.

Three. Mixing transmission system

JDC500 concrete mixer mixing drive system is composed of electric motor, mixing reduction box, coupling and mixing shaft components.

The motor is installed on the end face of the chassis of the frame, and drives the power reduction box and the coupling to rotate the stirring shaft for stirring.

4. Water supply system

The water supply system consists of micro water pumps, foot valves, suction pipes, gate valves, water delivery pipes, water spray pipes and other components

V. Unloading mechanism

The discharging mechanism of JDC500 concrete mixer adopts a new design high-strength rack, which is a rolling straight overturning fast-discharging structure. It has the advantages of fast discharge, net discharge, controllable discharge, and has nothing to do with the door jam.

6. Rack

JDC500 concrete mixer frame is composed of chassis, legs, and traveling tire components.

7. Electrical control system

The electrical system of JDC500 concrete mixer includes agitating motor, lifting brake motor, miniature water pump motor worm gear box, discharge motor, travel switch, control box and other parts, which have stable performance, safety and reliability.

Use range