JZC500 Concrete Mixer
JZC500 concrete mixer belongs to self-falling drum type mixer. This mixer adopts components produced by foreign suppliers. It has reliable performance and good mixing quality.
Changli JZC500 concrete mixer has the following advantages:
1. The ingredients are mixed together to achieve continuous and uninterrupted production;
2. Simple and reasonable structure, no installation required, can be dragged and moved, and easy to use;
3. Improved on the basis of traditional mixer, better quality and higher mixing efficiency.
|Feed capacity: 800 liters|
|Water pump power: 0.75KW|
|Output capacity: 500 liters||Water supply accuracy: ≤2%|
|Productivity: 18-20m³ / h||Rotating speed of mixer: 13 rpm|
|Stirring power: 11KW||Large aggregate size: 60 / 80mm|
|Increase motor power: 5.5KW||Large execution speed: 20kg / h|
I. Feeding system
The feeding system of the JZC500 concrete mixer is composed of a hoisting mechanism, a feeding rack, a hopper, and a feeding hopper.
Brief description of work
The brake motor drives the drum to rotate through the reducer, and the wire rope climbs up the feeding rack track by the pulley to pull the hopper. When climbing to a certain height, the two rollers on the hopper door at the bottom of the hopper enter the horizontal fork of the feeding rack and automatically open the hopper door The material is put into the mixing drum through the feeding nozzle.
The travel switch is responsible for controlling the upper and lower limit positions. There are two limit switches for the upper limit position, which limit the safety of the hopper as it rises.
2. Stirring system
Brief description of stirring
The structure of the mixing cylinder is a double-conical cylinder, with high and low blades welded in the cylinder, which respectively form a certain angle with the stirring axis. When the mixing cylinder rotates during stirring, the blades make the material as an axis while lifting and falling. Stir to and fro, so the stirring is strong and the stirring effect is better.
The mixing drum is supported by four tugs. The rotation of the mixing drum is achieved by the motor driving the large ring gear on the cylinder through the transmission device, and the transmission is reliable.
3. Water supply system
Start the water pump to inject water into the mixing drum. The time relay in the electronic control system controls the running time of the pump to grasp the amount of water required to stir each tank of concrete. When the knob is turned to "time control", the water pump will automatically run according to time and stop.
The JZC500 concrete mixer is equipped with front support wheels, and the four corners of the chassis are equipped with legs, which can adjust the height. When the mixer is working, the legs should be firmly supported to stabilize the whole machine.
1. What parts does JZC500 concrete mixer consist of?
Answer: JZC500 concrete mixer is composed of feeding mechanism, mixing mechanism, transmission mechanism, water supply mechanism, chassis and electronic control system.
2. What is the feeding mechanism of JZC500 concrete mixer?
Answer: The feeding mechanism of the JZC500 concrete mixer is composed of a feeding rack, a feeding hopper and a lifting device. The feeding system of the fully automatic JZC500 concrete mixer is slightly different. It is composed of a hoisting mechanism, a feeding rack, a hopper, a feeding hopper, etc. Partial composition.
3. How does the motor of JZC500 concrete mixer work?
Answer: Its brake motor can ensure that the hopper is reliably stopped at any position when the hopper is running at full load. The size of the braking torque is adjusted by the large nut on the back seat of the motor.