北京快乐8

Concrete mixing building

Concrete mixing building

The concrete mixing building is a new type of concrete mixing equipment. The aggregate measuring system used in the concrete mixing building has four fewer intermediate links than the concrete mixing station. It has been changed to vertical blanking. This method saves a lot of measuring time and can greatly improve Production efficiency, the production efficiency of the same type of mixing building is one third higher than that of the mixing station.

178 3993 6555

Product advantages

1. Special metering system, more than 30% higher production efficiency than the same type of mixing station

2. The main machine is a special space truss structure with good overall rigidity and strong bearing capacity.

3. Outstanding outer sealing and material flow dust removal system, greatly reducing the environmental pollution caused by dust and noise

4. The electrical control system adopts imported components, complete functions, reliable performance and easy operation.

5. Imported Shigaoma mixer, some four-sealing technology to ensure no leakage of slurry

6. One-time upgrade, lower energy consumption and failure rate than concrete mixing plant

Product parameters

project unit 180 120 90 60
Output capacity Rise 3000 2000 1500 1000
Feed capacity Rise 4800 3200 2400 1600
Aggregate weighing capacity kg 9000 6000 4500 3000
Large weighing value of cement scale kg 1800 1200 1000 600
Large weighing value of fly ash scale kg 800 500 300 300
Large scale weighing value kg 800 600 500 300
Large weighing value of liquid admixture scale kg 50 50 30 30
Mixing power kilowatt 2x55 2x37 2x30 2x18.5
Total power kilowatt 178 127 108

92

Discharge height Meter 3.8 3.8 3.8 3.8
Aggregate measurement accuracy % ± 2 ± 2 ± 2 ± 2
Water metering accuracy % ± 1 ± 1 ± 1 ± 1
Measurement accuracy of cement and fly ash % ± 1 ± 1 ± 1 ± 1
Additive metering accuracy % ± 1 ± 1 ± 1 ± 1
productivity m 3 / h 150 100 80 60

product description

The concrete mixing tower, as a complete set of mixing equipment for producing concrete, is basically similar to the concrete mixing station, but there are some differences. The specific differences are as follows:

1. The concrete mixing station is mainly composed of five systems: the mixing host, the material conveying system, the weighing system, the storage system and the control system. The structure of the concrete mixing building is relatively simple.

2. The aggregate silo of the concrete mixing building is above, and the aggregate is directly sent to the mixer after the aggregate is measured; while the aggregate silo of the mixing station is below, after the aggregate is measured, it needs to be conveyed into the mixer through the inclined belt. Generally speaking, the aggregate that is lifted once is called the building, and the one that is lifted twice is called the station.

3. Because the aggregate silo of the mixing building is above, the steel structure is relatively large and the inclined belt is relatively long. But the productivity of the mixing plant is about one third higher than that of the mixing plant of the same model. The inclined belt of the mixing station will start frequently during operation, and the energy consumption and failure rate will increase, while the energy consumption and failure rate of the mixing building will be relatively low.

4.Because the production capacity of the mixing station is smaller than that of the mixing building, the structure is easy to disassemble and install, and it can form a container transfer site, so it is suitable for the construction site of the building. Suitable for large water conservancy projects or large commercial concrete manufacturers.

Compared with the concrete mixing station, the concrete mixing building has the characteristics of large output and high production efficiency, but it is not easy to transfer. Therefore, when choosing the concrete mixing equipment, customers should choose the equipment suitable for them according to their actual use scenarios and needs. .

common problem

1.What are the differences between a concrete mixing plant and a mixing plant?

First of all, the difference between the concrete mixing station and the mixing tower system: the mixing station has five major systems, such as a material supply system, a metering system, a mixing system, and an electrical control system. The mixing building is relatively simple. Secondly, the aggregate silo of the mixing building is on the top, and the aggregate is directly fed into the mixer after being weighed; while the aggregate silo of the mixing station is below, after the aggregate is weighed, it needs to be transported through the inclined belt to enter the mixer. In simple terms, the one that promotes the aggregate is called the building, and the second one is called the station. Because the aggregate silo of the mixing building is on top, the steel structure will be relatively large, and the inclined belt will be relatively long. However, in terms of productivity, the productivity of the mixing plant is about one fifth higher than that of the mixing station. During the operation, because the inclined belt of the mixing station is frequently started, the energy consumption and failure rate will increase, while the energy consumption and failure rate of the mixing building is relatively low. Later, due to the small production capacity of the mixing station, the structure can be easily disassembled and assembled, which can be used as a container transfer site, and is suitable for building construction sites; while the mixing building has large volume and high productivity, it can only be used as a fixed mixing device, suitable for large-scale water conservancy projects Supply of high-volume commercial concrete. Therefore, when the customer is distinguishing between the concrete mixing station and the concrete mixing building, the customer chooses suitable equipment from the aspects of aggregate (material) improvement times and production efficiency.

2. What is the structure of the discharge hopper of the concrete mixing building?

Unloading hopper After the finished concrete is discharged from the mixer, it falls into a transition hopper of the mixer truck. It has a temporary storage effect on the finished product, which has a buffer effect on the mixer truck, and can allow the finished product in the mixer to be discharged as soon as possible. It consists of bucket body, wear-resistant liner, clamp, rubber tube and so on.